In this tutorials, we look at the ways to boot from different devices on your UEFI computer.We show you how to access UEFI setup as well as change boot order On UEFI computers you can access a boot menu. Attach your USB flash drive and while booting the computer tap F12. This will give you a boot menu where you can select the UEFI USB device. Back to top.

Yes No. 07-27-2016 02:52 PM. Then, assuming you tried resetting the BIOS to default and still do not see the flash drive, it is possible a BIOS fix might be needed. YOu should open a support case with HP so they can possibly replicate the problem and work on a solution.

Put in the PC's, Laptop's USB port. Power on the PC/Laptop and push the ESC (can be F8, F10, etc.. depending on the PC) until you get into the boot selection section. Boot from the USB.
If you want the legacy Advanced Options menu like W7, and you have Windows 8 or 10, you can revert the bootloader to legacy mode so F8 works like it did with Windows 7. Open an elevated (Administrator) Command Prompt and type the following command: bcdedit /set {default} bootmenupolicy legacy. Spaces in this command are important, restart and
Way 1: Use HP boot menu key to boot from USB. Step 1. Turn on or restart your laptop and press the HP boot menu key - ESC or F9 immediately to access its boot menu. Step 2. Wait until the HP boot menu to show up and you will see 4 options in the following. Press F9 to access BIOS boot options. Step 3.
QUNNAG. 466 48 247 416 24 330 32 290 366

hp laptop legacy boot option not showing